Insulating rubber sheets are important protective materials for electrical equipment and are widely used in substations,distribution rooms,and other places to provide insulation protection.Correct construction methods not only enhance their effectiveness but also extend their service life and ensure construction safety.The following are detailed construction methods and precautions for insulating rubber sheets.
Before formal construction,thorough preparation is necessary.
Construction personnel must wear protective gloves and glasses and other personal protective equipment to prevent accidents.At the same time,the construction site should be cleaned to ensure the ground is clean,free of debris and oil stains,which may affect the adhesion of the insulating rubber sheet.Additionally,the required tools and materials,such as knives,cleaners,and glue,should be prepared according to actual needs.
The next step is measurement and cutting.
Accurately measure the dimensions of the equipment based on the actual situation and mark the corresponding dimensions on the insulating rubber sheet.Use a special knife to cut the insulating rubber sheet according to the measurement results.During the cutting process,ensure the edges are neat and avoid rough or uneven edges.Also,be careful not to scratch or damage the surface of the insulating rubber sheet.
＞send emails to sales@jingdongrubber.com,get a quote now
Before installation,the surface of the equipment and the insulating rubber need to be cleaned.
Use a clean cloth or cleaner to wipe the surface of the equipment to remove dust,oil stains,and other impurities,ensuring the surface is clean and dry.Similarly,the surface of the insulating rubber sheet should also be cleaned to ensure a good fit with the equipment surface.
When adhering the cut insulating rubber sheet to the equipment surface,special attention should be paid to alignment and adhesion.
Start from one end and gradually lay the insulating rubber sheet on the equipment surface.Use a scraper or similar tool to gently press it down,expelling air and ensuring a tight fit.During the laying process,avoid creating air bubbles or wrinkles,which may affect the insulation effect.
For areas that need to be fixed,special glue or double-sided tape can be used for fixation.
When applying glue,apply it evenly and control the amount to avoid excessive or insufficient application,which may result in insecure fixation or overflow and contamination.After fixation,wait for the glue to dry completely before proceeding with subsequent operations.
After construction is completed,a comprehensive inspection of the insulating rubber sheet must be conducted to ensure its quality meets the design requirements.
The main inspection items include whether the rubber sheet is completely adhered to the equipment surface and whether the fixation is firm and reliable.At the same time,check the surface of the insulating rubber sheet for scratches,damage,or cracks.If any defects are found,they should be replaced or repaired promptly.
In addition to the precautions during the construction process,daily use and maintenance are equally important.
Insulating rubber sheets should be kept away from high-temperature environments exposed to direct sunlight to prevent accelerated aging.They should also be kept dry and clean and avoid contact with oil,transformer oil,industrial alcohol,acids,and alkalis,which may cause corrosion or damage.When used outdoors,due to the tendency to age easily,it is generally recommended to use them in indoor environments such as distribution rooms and substations.
The construction methods for insulating rubber sheets involve multiple steps and details,and strict adherence to operating procedures is necessary to ensure construction quality and safety.
Through correct construction methods and maintenance measures,the insulation protection function of insulating rubber sheets can be fully utilized,providing a strong guarantee for the safe and stable operation of electrical equipment.
Jingdong Rubber Co., Ltd. is a professional rubber sheet manufacturer, producing silicone rubber sheet, natural rubber sheet, fluorine rubber sheet, neoprene rubber sheet, insulating rubber sheet,EPDM rubber sheets, oil-resistant rubber sheets, anti-static rubber sheets, flame-retardant rubber sheets, conductive rubber sheets, anti-slip rubber sheets, and cowshed mats, etc. with 40 years of industry experience, are popular both at home and abroad. If you need any of our products,please send emails to sales@jingdongrubber.com.