Tips for Choosing Rubber Sheets

Rubber Sheets

Rubber sheets are a common industrial material used in applications such as vibrating screens,conveyor belts,and seals.When selecting rubber sheets,what are some tips to keep in mind?Let’s learn about it from Jingdong Rubber.

When selecting rubber sheets,pay attention to the following six factors:surface,paint,material,structure,bonding,and density and hardness.

Rubber Sheets
1.Rubber Sheet Surface
During the manufacturing process,rubber sheets may have impurities or untreated surfaces.These impurities or rough surfaces can make the rubber sheets easily damaged,easily contaminated,and reduce their lifespan.Therefore,when selecting rubber sheets,pay attention to the surface treatment.

2.Quality of Paint on Rubber Sheets
Place the floor in a well-lit area and look for bubbles,dots,and orange peel on its surface.Then,check whether the paint surface is rich,full,and flat.

3.Material of Rubber Sheets
The common materials of rubber sheets include natural rubber,butyl rubber,and nitrile rubber.Among them,natural rubber has better flexibility and elasticity,while butyl rubber and nitrile rubber have better wear resistance and oil resistance.Choose the appropriate material of rubber sheet based on the specific use environment and requirements.

4.Structure of Rubber Sheets
Check whether the structure of the rubber sheet is symmetrical and balanced by looking at the two ends of the rubber sheet.If it meets the symmetry and balance principle,the structure will be stable.

5.Bonding of Rubber Sheets
Check whether the layers of the rubber sheet are bonded tightly by hand.If there is no layer separation,it means the bonding is good.

6.Density and Hardness of Rubber Sheets
The important parameters of rubber sheets are density and hardness.Generally,the higher the density of the rubber sheet,the better its strength and durability.The higher the hardness index,the higher the density of the rubber sheet,and the better its flexibility and elasticity.When selecting,also choose the appropriate density and hardness of rubber sheet based on the specific use scenario and requirements.